Download Center / Document Guide
HM5 & HM6 Inverter Datasheet v1.5
This page summarises the linked ESYSUNHOME HM5/HM6 inverter datasheet identified as v1.5 in its filename. It provides a readable reference to that document for existing systems and specification checks. For a new installation, compare it with the current product-page download and confirm the appropriate revision with your installer.
HM5 and HM6 Ratings
| Specification | HM5 | HM6 |
|---|---|---|
| Rated power | 5,000 W | 6,000 W |
| Grid connection | Single-phase, 230 V AC | Single-phase, 230 V AC |
| Number of MPPTs | 2 | 2 |
| Maximum PV input power | 8,000 W | 8,000 W |
| Nominal battery voltage | 51.2 V DC | 51.2 V DC |
| Maximum efficiency | 97.8% | 97.8% |
| Enclosure rating | IP66 | IP66 |
How to Read These Specifications
Power in kW describes the inverter’s output capability; battery energy in kWh describes stored energy. The values above are inverter ratings from this particular datasheet, not a promise of usable battery capacity or backup duration. System runtime depends on the installed battery configuration and the connected loads.
The source lists an operating temperature range of -25 to 60 degrees C, with derating above 45 degrees C, and natural cooling. These ratings do not replace the installation manual’s site-selection requirements.
Document Scope and Revision
The English PDF has two pages and is approximately 0.76 MB. Its second page includes protection functions, communications and standards references, including AS 4777.2. Confirm local approval and revision requirements separately; a standards reference in a datasheet is not a substitute for a project’s required certification.
For the current product offering, follow the HM5 or HM6 product link below. For mounting, wiring and commissioning, use the installation manual rather than this specification summary.