Download Center / Document Guide
HM10-H, HM15 & HM20 Three-Phase Datasheet
This English datasheet covers the ESYSUNHOME HM10-H, HM15 and HM20 residential all-in-one three-phase systems. The table below transcribes selected ratings from page two of the linked document, making the model differences easier to compare alongside the original PDF.
Three-Phase Model Comparison
| Specification | HM10-H | HM15 | HM20 |
|---|---|---|---|
| Rated output power | 10 kW | 15 kW | 20 kW |
| Maximum PV input power | 20 kW | 30 kW | 30 kW |
| MPPT count | 2 | 2 | 2 |
| Rated grid voltage | 400 V AC, three-phase | 400 V AC, three-phase | 400 V AC, three-phase |
| Maximum efficiency | 98.20% | 98.20% | 98.20% |
| Battery chemistry | LiFePO4 | LiFePO4 | LiFePO4 |
| Enclosure rating | IP66 | IP66 | IP66 |
Battery Configuration and Applications
The document illustrates configurations with 2, 3, 6 and 9 battery units and lists corresponding rated capacities of 21.08, 31.62, 63.24 and 94.86 kWh. These are the ratings printed in this file; usable capacity and the configuration offered for your site must be confirmed against the applicable product revision and quotation.
The datasheet lists modular stacking or ground mounting, an operating temperature range of -25 to 60 degrees C, and an intelligent air-cooling method. It also identifies backup operation and interfaces for energy management. Actual backup coverage depends on system design and the loads connected.
Using the Download
The two-page PDF is approximately 17.1 MB and contains image-based pages. The HTML table provides a text reference; retain the original PDF for the full electrical limits, battery data, dimensions and standards references.
Use the product pages below to review each model’s current offering. Ask your installer to confirm the required regional certificates, battery configuration and document revision before specifying equipment. This datasheet is a specification reference, not a wiring or commissioning guide.